Resources · Speed Queen
Speed Queen Error Codes
Speed Queen machines are built for heavy use, and their codes are blunt. A front-load washer shows Er with a two-letter message, and a dryer shows Er ro. Classic models with no display mostly just stop, so the code list applies to the digital-display models only. Most of these tell you which hose, filter or door to check.
Open 7 days Mon–Fri 7 AM–10 PM · Sat 8 AM–10 PM · Sun 8 AM–8 PM
Speed Queen front-load washers (digital display)
Speed Queen says to unplug the machine for 15 seconds to clear many of these codes.
| Code | What it means | What to check |
|---|---|---|
| Er dr | Water is still in the washer at the end of the cycle. | Check the drain hose and drain receptacle are installed properly and not blocked, and clean the foreign object trap in the pump. |
| Er FL | The washer did not reach the fill level within 30 minutes. | Make sure both taps are on, the fill hoses are not kinked, and clean the screens in the mixing valve and at the faucet end of the hoses. |
| Er nF | The washer has not filled to the proper level. Very little change in water level was sensed within 5 minutes of the current fill. | The same checks as FL: taps, hoses and screens. |
| Er OF | The washer has filled to the overflow level. | Clean the foreign object trap in the pump. If the code does not clear, unplug the machine and call. |
| Er dL / Er dl | The control senses the door has unlocked during a cycle (dL) or has not locked (dl). | Close the door fully and try again. If it continues, call for service. |
| Er do | The control senses the door is open during a running cycle. | Close the door. Unplug the machine to clear the code. |
| Er dU | The door will not unlock. | Unplug the machine for three minutes to unlock the door. If it happens again, call for service. |
| Er PS | The control has trouble sensing the water level. | Unplug the machine and call for service. |
| Er ub | The washer did not reach its top spin speed. Cause: an unbalanced load, suds or water left in the tub. | Use evenly distributed loads and HE detergent. Open the door or press Power/Cancel to clear. |
| Er SL / Sr | An oversudsing condition. Sr means the washer is running a routine to remove the suds. | Use low-sudsing HE detergent. If you use non-HE detergent, use half the recommended amount. |
Speed Queen dryers (digital display)
| Code | What it means | What to check |
|---|---|---|
| Er ro | The dryer's motor overload protector has cycled. | Press Start/Pause to clear the control and restart. If the code shows again, stop using the dryer and call for service. |
| Dryer takes too long to dry | Not a code. A common sign of a restricted vent. | Clean the lint screen and have the exhaust vent checked from the dryer to outside. Keep the weather hood clear. |
Codes vary by model and year. If your code is not listed, call (619) 743-9389 with the model number. See also Speed Queen appliance repair in San Diego.
FAQ
Speed Queen code questions
Why does my Speed Queen washer not show any codes?
Classic models have no display. They simply stop when something is wrong. If yours stops mid-cycle, check the door, the water taps, and the drain hose, then call with the model number.
What does Er dL mean on a Speed Queen washer?
The control sensed the door unlock while a cycle was running. Unplug the machine to clear the code, close the door firmly and run it again. If the code returns, the door lock needs testing.
Is Er ro on a Speed Queen dryer serious?
It means the motor overload protector tripped. Clear it with Start/Pause and restart. A second time means stop using the dryer. A restricted vent or a failing motor can both cause it, and the vent is the first thing we check.
Speed Queen code will not clear? Book a diagnostic.
Open 7 days Mon–Fri 7 AM–10 PM · Sat 8 AM–10 PM · Sun 8 AM–8 PM. San Diego and Orange County.
Call us for a diagnosis.