Appliance installation · San Diego County
Stove Installation in San Diego
Stove installation in San Diego is priced before the visit, from the appliance and the hookups you have. Reset Appliance Repair connects, levels and tests it, and hauls away the old unit when you ask. Book online or call (619) 743-9389.
Reset Appliance Repair installs gas, electric and induction ranges in San Diego. Every gas installation gets a new flexible connector and a leak test, and every range gets its anti-tip bracket, the part most installers leave in the box.
- Fitted, connected and tested
- Old unit hauled away when you ask
- Same-day service when a slot is open
- Evening appointments available
Open 7 days Mon–Fri 7 AM–10 PM · Sat 8 AM–10 PM · Sun 8 AM–8 PM
Book stove installation
Tell us the brand if you know it, and your ZIP. We call you back with a time.
Request received.
We will call you back to set a time. Need it sooner? Call (619) 743-9389.
What can go wrong
What a proper range installation covers
- The gas connector
- Replaced, never reused. We check the shut-off valve works and does not leak.
- The anti-tip bracket
- It stops the range tipping forward if a child stands on the open oven door. It must be fixed to the floor or wall.
- The power supply
- A gas range needs a 120-volt outlet. An electric or induction range needs a 240-volt circuit, usually 40 or 50 amps.
- Levelling
- A range that is not level cooks unevenly and lets pans slide.
- Fuel type
- A range set up for natural gas must be converted before it is used on propane.
The visit
What the installation includes
Priced before the visit, from the appliance and the hookups you have. Call (619) 743-9389 or send the request form for a price.
- 1
We check the gas valve or the electrical outlet and the opening.
- 2
We remove the old range and haul it away if you ask.
- 3
We connect the new range, leak-test the gas joints and fit the anti-tip bracket.
- 4
We level it and test every burner and the oven.
In San Diego
Switching from gas to induction
More San Diego homeowners are replacing gas ranges with induction. Induction needs a 240-volt, 40-amp or 50-amp circuit that a gas kitchen will not have. An electrician runs the circuit first, then we install the range.
Do you convert ranges to propane?
Yes, where the manufacturer supplies a conversion kit. We change the orifices and adjust the regulator.
Can you install a slide-in range?
Yes, slide-in and freestanding. Slide-ins need the countertop gap and the rear filler checked first.
Why does the anti-tip bracket matter?
Without it a range can tip forward when weight is put on the open oven door. It is a required part of the installation.
Book stove installation in San Diego.
Open 7 days Mon–Fri 7 AM–10 PM · Sat 8 AM–10 PM · Sun 8 AM–8 PM. San Diego County.