Open 7 days Mon–Fri 7 AM–10 PM · Sat 8 AM–10 PM · Sun 8 AM–8 PM

Same-day service

Resources · Miele

Miele Error Codes

Miele machines name their faults with an F number and then tell you to check the drain, the water intake or the waterproof system. The manual is blunt about which faults you can fix yourself and which need Miele service. That is how we have grouped these.

Open 7 days Mon–Fri 7 AM–10 PM · Sat 8 AM–10 PM · Sun 8 AM–8 PM

Miele dishwashers

Models differ. On some newer models the drain pump cover must also be seated correctly for F11.

CodeWhat it meansWhat to check
F11Water drainage fault. There may be water left in the wash cabinet.Clean the triple filter, the drain pump and the non-return valve, and remove any kinks or high loops in the drain hose. Make sure the non-return valve sits flush.
F12 / F13Water intake fault.Open the water supply fully and clean the screen in the supply valve. If pressure is below the minimum in the manual, a plumber needs to look at it.
F70The waterproof system has detected a fault.Close the water supply and switch the machine off at the wall. Then call for service. The drain pump may keep running with the door open.
Any other FXXA technical fault.Switch the machine off, wait a few seconds, switch it on, select a program and close the door. If the lights flash again, call for service.

Miele washing machines

Miele publishes a separate help article for each washer fault. These are the two we see most.

CodeWhat it meansWhat to check
F11A restricted drain.Check the drain hose for kinks and height, then clean the drain filter and pump.
F34A door lock fault.Close the door firmly and check nothing is trapped in it. If the code returns, the lock needs service.

Codes vary by model and year. If your code is not listed, call (619) 743-9389 with the model number. See also Miele appliance repair in San Diego.

What does F11 mean on a Miele dishwasher?

The dishwasher could not drain. The cause is usually a clogged filter, a non-return valve that has come unseated, or debris around the drain pump. Cleaning those three clears most F11 faults.

Is Miele F70 dangerous?

It is a safety shutdown. The waterproof system has detected water where it should not be. Close the water supply, switch the machine off and book service. Do not keep running it.

Can I reset a Miele dishwasher after a fault?

You can turn it off, wait a few seconds and turn it on. If the same fault code reappears, the fault is real and needs a technician. Resetting does not repair a leak or a failed part.

Miele code will not clear? Book a diagnostic.

Open 7 days Mon–Fri 7 AM–10 PM · Sat 8 AM–10 PM · Sun 8 AM–8 PM. San Diego and Orange County.

Call us for a diagnosis.

Call Book online